Quick Answer: Can You Apply Thompson’S Water Seal In The Rain?

How long will ready seal last?

1 ½ to 2 yearsAn unopened can or bucket of Ready Seal has an average shelf life of 1 ½ to 2 years.

Any opened but unused product should be placed into the smallest container possible to minimize excess air/oxygen contact..

What to do if it rains while staining a deck?

Try applying stain in an inconspicuous spot to see if it fixes the rain damage. If a light recoat does not fix the problem, try using a mix of wood cleaner and a pressure washer to see if you can wash the spots without harming the stain. You could also try lightly sanding the spots and recoating.

How long does Cabot stain need to dry before rain?

Wait at least 24 hours after washing your deck to apply stain. Also, try to avoid staining your deck right before it rains. Most stains require at least 2-3 hours for drying.

How many coats of Thompson Water Seal do I need?

one coatApplication: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.

How long does deck sealer need to dry before rain?

24 hoursApplying Stain Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it’s time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.

How soon can it rain after applying Ready Seal?

about 45 minutesReady Seal is rain safe in about 45 minutes, meaning once the stain is applied rain or moisture will not affect the finished product after 45 minutes of application.

Is Thompson’s Water Seal good?

Very durable. 5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way.

How many coats of ready seal do I need?

TwoTwo light coats or one heavy coat. – Surface must be clean of mildew, dust, dirt, oil and grease. – Ready Seal recommends applying one part bleach and three parts water. – All previous stains and sealers must be completely removed.

How long does Thompson’s Water Seal need to dry before rain?

For deck stain, the deck surface and air temperature should be between 50 and 95 Fahrenheit for application and drying. The forecast should indicate no rain for at least 24 hours after application. The deck surface should be allowed to dry for at least 48 hours before application.

What happens if it rains on a freshly oiled deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you’ve stained the wood, the stain will peel and flake off.

How long can you store Thompson Water Seal?

Does Thompson Water Seal go bad? Opened cans of glazing compound will last for 1 year, unopened cans for 2 years, if kept above freezing. … PVC primer and Thompson’s Water Seal™, sealed tightly, can be kept indefinitely (no minimum temperature), as can concrete bonding additive if stored above freezing.

Is ready seal any good?

Ready Seal is virtually goof-proof and dries to an even finish with no runs or drips. Coverage rate is not that good, hence the reason for the 8 score. The overall color was good, it does fade significantly after 3 days, however. – Ready Seal Wood and Deck Stain did not darken at all after 2 years.

What happens if it rains on Thompson Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.