- What is the best concrete mix for fence posts?
- Is one bag of Postcrete enough for one post?
- Is 1 foot deep enough for fence post?
- Can pressure treated posts be set in concrete?
- Is quikrete as strong as concrete?
- Do you need gravel under concrete?
- How deep should a 8 foot fence post be?
- How deep should a 7 foot fence post be?
- How many bags of concrete do I need for a post?
- How do you keep fence posts from rotting in concrete?
- Can I pour concrete in a hole full of water?
- How much concrete is needed for a fence post?
- Is 2 feet deep enough for fence posts?
- Should I use concrete for fence posts?
- Should I use 4×4 or 6×6 fence posts?
- How do I make sure fence posts are in line?
- How much does a 6 foot fence cost?
- How many feet apart do you put fence post?
- How long does it take for concrete to dry for fence posts?
What is the best concrete mix for fence posts?
In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate).
Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this)..
Is one bag of Postcrete enough for one post?
“Usually one bag of postcrete per post is enough, however you can use a two bags per post if you feel this is needed. The instructions are on the bag.”
Is 1 foot deep enough for fence post?
Especially since posts are responsible for supporting the rest of the fence, including panels and heavy gates, you must make sure that you buy a long enough post for your purposes and bury it deep enough. In most circumstances, a 1-foot hole will not be deep enough to provide proper support.
Can pressure treated posts be set in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … Concrete should be poured around the post – no concrete under the post.
Is quikrete as strong as concrete?
Quikrete fast setting concrete is just as strong as regular concrete. Concrete gets its strength from a chemical reaction that occurs over time during curing. After it’s had time to cure, which usually take 28 days to complete, Quikrete can reach strengths up to 5000 psi.
Do you need gravel under concrete?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
How deep should a 8 foot fence post be?
3 feetIn general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
How deep should a 7 foot fence post be?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
How many bags of concrete do I need for a post?
two bagsOur example post will require two bags for every post if you’re using fast-setting concrete. Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow.
How do you keep fence posts from rotting in concrete?
Caulk Around the Fence Post Base Apply high-quality exterior acrylic latex caulk, or silicone specifically designed to adhere to concrete, at the base of the post.
Can I pour concrete in a hole full of water?
The good news is that you can pour the concrete in water. … The biggest issue with pouring concrete under water is movement. If the water is moving, it can wash away the cement paste that’s holding the sand and gravel together. But if the water is calm, then it’s not a problem at all.
How much concrete is needed for a fence post?
Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
Should I use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. … Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
Should I use 4×4 or 6×6 fence posts?
4×4 is perfect for these very standard fence dimensions. Normally 4×6 or 6×6 are needed for gates or extreme wind loads.
How do I make sure fence posts are in line?
Step 1: Clear the Fence Line. Remove any vegetation in the path of the fence. … Step 2: Mark the Corners. … Step 3: Make Batter Boards. … Step 4: Align the First Batter Board. … Step 5: Square the Corners. … Step 6: Set Stakes to Mark Posts. … Step 7: Align Posts with the String or Laser.
How much does a 6 foot fence cost?
An average 6-foot tall wood fence costs $2,755 to install, with most homeowners paying between $1,711 and $3,290. Depending on the type of wood, prices range from $12 to $27 per linear foot for both labor and materials. The total cost varies based on materials, size, design, and labor expenses.
How many feet apart do you put fence post?
Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide. Mark the exact position where you’d like each post hole dug.
How long does it take for concrete to dry for fence posts?
The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.